Plasticolor White Conversion Varnish Pigmented Topcoat High Gloss 5 gal. (pail)
Plasticolor White is an acid curing high-solids fast drying Reactive Amino Coating (RAC) with good building properties. This is a fast building product due to its high solid content (52% volume). It gives a smooth, knock-proof and hardwearing surface resisting influence from alcohol, water, etc. This pigmented conversion varnish has very good light stability based on the type of resin used.
Catalyze and reduce material as recommended. Contact with metal surfaces should be avoided once the Plasticolor White has been catalyzed. To ensure proper sheen, the catalyzed material should be agitated at all times. Plasticolor enamel must be thoroughly stirred, while adding hardener and reducers in the recommended ratio. Apply 3-5 mils wet on sanded surface. A subsequent coat can be applied after complete cure and a good sanding with a #280/320 grit paper is necessary to obtain a good adhesion. Dry film thickness of topcoat must not exceed 3 mils. Total dry film thickness of system should not exceed 6 mils.
Gloss Plasticolor may be rubbed and polished to a dirt free high gloss finish. Polishing methods should be discussed with your technical representative.
To obtain complete cure, the primer must be applied at a temperature above 18ºC and relative humidity below 65%. When drying, this product is not to be exposed to ammonia vapors. Finished surface must not be cleaned with ammonia containing products.
Primers to use with 117-32XX: 220-005, 220-214, 220-2250, 225-0010, 522-1410, 522-1624, 545-8016 and 546-7257.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |