ES Lacquer White Pre-Cat Pigmented Topcoat Low Gloss 5 gal. (pail)
E.S. Lacquer is a one-component, Pre-Catalyzed lacquer especially developed for surface treatment of furniture where a beautiful appearance with good resistance properties is desired. E.S. Lacquer is fast drying and well suited for spraying as well as coating by roller and curtain coating.
Agitate material before use. Always mix E.S. Lacquer while adding hardener and reducers in the recommended mixing ratios. E.S. Lacquer must be agitated thoroughly at all times to ensure product consistency and consistent gloss.
Apply at 3-5 mils wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper.
Maximum film build of E.S. Lacquer should not exceed 4 mils dry. Maximum film build of total coating system must not exceed 4 mils dry. To obtain a complete cure, the system should be applied at an ambient temperature above 18ºC and a relative humidity below 65%. When drying, this product is not to be exposed to ammonia vapors. Finished surfaces must not be cleaned with ammonia containing products.
Basecoats to use with 131-51XX: 225-0010, 522-1624, 545-8016, 546-7257 or self-seal
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |