ES Sealer II Pre-Cat Clear Sealer 1 gal. (can)
E.S. Sealer is a one-component Pre-Catalyzed Reactive Amino Coating (RAC) sealer. It has a rapid dry and sands easily to a smooth finish.
Agitate material before use. This product must be agitated thoroughly at all times to ensure consistency. Apply 3 to 5 mils wet on sanded surface. Further coats can be applied after complete drying of the first coat. A thorough sanding of each coat with paper # 280/320 is essential for proper adhesion. Eliminate all contact with metallic surfaces. Maximum film build of the topcoat should not exceed 2 mils dry. Maximum film build of the system should not exceed 4 mils dry.
To obtain complete cure, E.S. Sealer should be applied at a temperature above 18°C and relative humidity below 65%. When drying, this product is not to be exposed to ammonia vapors. Finished surfaces must not be cleaned with ammonia containing products. Always use plastic or stainless equipment to eliminate discoloration due to oxidation.
Topcoats to use with 390-001: 431-22XX, 431-90XX, 431-98XX, 421-55XX, 421-67XX, 421-72XX and 482-3XX
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |