Chemseal Clear Vinyl Sealer 5 gal. (pail)
Chemseal 401-0280 is a ready-to-use vinyl sanding sealer with good clarity and moisture resistance. It is a single pack, quick drying product with excellent sanding properties and is to be used where excellent adhesion is important.
Apply 3-5 mils wet on sanded substrate. Allow one hour to dry at a minimum of 20ºC prior to topcoating. Sand with 280/320 grit paper before topcoating and ensure topcoat is applied within eight hours of sanding Chemseal.
Always mix Chemseal while adding catalyst and reducers in the recommended mixing ratios. Chemseal must be thoroughly agitated at all times to ensure product consistency. When catalyzed, avoid contact with metal surfaces.
If used uncatalyzed, topcoat to use is 431-90XX and 431-98XX. Catalyzed Chemseal can be overcoated with following topcoats: 421-55XX, 421-63XX, 421-72XX, 482-3XX and 635-0XX.
Maximum film build of the sealer should not exceed 1 mil dry. Maximum film build of the system should not exceed 4 mils dry.
To obtain complete cure, the product must be applied at a temperature above 18ºC and relative humidity below 65%. When drying, this product is not to be exposed to ammonia vapors. Finished surface must not be cleaned with ammonia containing products.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |