Chemvar Conversion Varnish Clear Topcoat Low Gloss 5 gal. (pail)
Chemvar is a high quality, acid curing Reactive Amino Coating (RAC). This is a fast building product due to its high content (45% volume). Chemvar has very good light stability based on the choice of resin used in the product and the addition of a UV block additive. This conversion varnish gives a smooth, knock proof and hardwearing surface resisting influence from alcohol, water, etc.
Special recognition: when applied as specified, will meet required performance for the ANSI/KCMA A161.1 1990 9.0 Finish Test.
Catalyze and reduce material as recommended. Apply 3 to 5 wet mils on sanded surface. One extra coat can be applied following a complete cure and a sanding with a #280/320 paper. Maximum film build of the top coat should not exceed 3 mils dry. Maximum film build of the system should not exceed 4 mils dry. Chemvar must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats. Avoid all contact with metallic surfaces
To obtain complete cure, Chemvar must be applied at a temperature above 18ºC and relative humidity below 65%. When drying, this product should not be exposed to ammonia vapors. Finished surface must not be cleaned with ammonia containing products. Always use containers and equipment made of plastic or stainless steel to avoid discoloration of the material due to oxidation.
Sealers to use with 421-67XX: 390-001, 390-0060, 401-004 catalyzed, 401-028 catalyzed, 431-1219, 432-1220, 546-8003 and 546-5192.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |