Aqualac II Waterborne Clear Topcoat Satin Gloss 5 gal. (pail)

The first coat must be applied as is or reduced at 10% maximum with water. After 60 minutes of dry time, it must be sanded using a fine sand paper (ex.: 280,320) and free of sand dust. An extra coat is then applied, not reduced, depending on the desired wear resistance and the desired look. Additional coats must be done within 8 hours after sanding. Maximum film build of the system should not exceed 4 dry mils.

To obtain complete cure, the product must be applied at a temperature above 18°C and relative humidity below 65%. Contact with metallic surfaces must be avoided. Always use containers and equipment made of plastic or stainless steel to avoid discoloration of the material due to oxidation.

Keep from freezing.