E.S. HS Sealer 5 gal. (pail)
E.S. HS Sealer is a one-component, pre-catalyzed sealer designed for all types for all types of woods for interior use. It is rapid dry and sands easily to a smooth finish. This particular product is developed to have higher solids than our standard E.S. Sealer while maintaining the same ease of use.
Apply 1 or 2 coats of 3 to 5 mils wet and allow 30‑45 minutes dry at 20°C prior to sanding and applying next coating. A thorough sanding with 280/320 grit paper of each coat is essential for proper adhesion. Eliminate all contact with metallic surfaces. Maximum film build of the topcoat should not exceed 2 mils dry. Maximum film build of the system should not exceed 4 mils dry.
431-1219 is used under pre-catalyzed following topcoat: 431-90XX and 431-98XX (355-8XX).
To obtain complete cure, E.S. HS Sealer should be applied at a temperature above 18°C and relative humidity below 65%. When drying, this product is not to be exposed to ammonia vapours. Finished surfaces must not be cleaned with ammonia containing products. Always use plastic or stainless equipment to eliminate discoloration due to oxidation.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |