Catlac Pre-Cat Low VOC Clear Topcoat Semi-Gloss 5 gal. (pail)
Catlac is a one component, ready to use, Pre-Catalyzed Reactive Amino Coating (RAC). This product dries quickly and demonstrates good household wear, household chemical and solvent resistance.
Special Recognition: Meets Kitchen Cabinet Manufacturer Associations (KCMA) Standards.
Agitate material before use. Keep under mixing to ensure product consistency and consistent gloss. Apply at 3- 5 mils on sanded sealer. One extra coat may be applied after complete drying followed by sanding with 280/320 grit stated paper. The subsequent coat must be applied the same day as the previous coat is sanded. Maximum film build of the topcoat should not exceed 2 mils dry. Maximum film build of the system should not exceed 4 mils dry. Eliminate all contact with metallic surfaces. Catlac must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats.
To obtain complete cure, Catlac should be applied at a temperature above 18°C and relative humidity below 65%. When drying, this product is not to be exposed to ammonia vapours. Finished surfaces must not be cleaned with ammonia containing products. Always use plastic or stainless equipment to eliminate discoloration due to oxidation.
Sealers to use with 431-30XX: 390-0060, 431-1219, 546-8003 and 546-5192.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |