VARICURE SELECT Pre-Cat Clear TC Low Gloss, 5 gal. (pail)

Agitate material before use. Always mix VARICURE SELECT Clear Topcoatwhile adding reducers in the recommended mixing ratios. VARICURE SELECT Clear Topcoatmust be agitated thoroughly at all times to ensure product consistency and consistent gloss.Apply at 3- 5 mill wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper. The second and subsequent coats must be applied the same day as the previous coat is sanded. The maximum film build of VARICURE SELECT Clear Topcoatshould not exceed 4 mils dry. This product is intended as a self-seal product; however, if a sealer is desired VARICURE SELECT Sealer 431-5201.Maximum film build of total coating system must not exceed 4 mils dry. Contact with metal surfaces should be avoided.VARICURE SELECT Clear Topcoatmust not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats. VARICURE SELECT Clear Topcoatmust not be used and dried at temperatures below 64°F or relative humidity above 65%. During hardening theVARICURE SELECT Clear Topcoatmust not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration. This product does contain formaldehyde, but the quantity is below the reportable amount according to OSHA regulation 1910.1048.