Opticlear Pre-Cat Clear Topcoat High Gloss 5 gal. (pail)
Opticlear is a one component, Pre-Catalyzed lacquer especially developed for surface treatment of furniture where a beautiful appearance with good resistance properties is desired. To augment the chemical resistance of the product, Opticlear 431-90XX may be catalyzed.
Agitate material before use. Always mix Opticlear while adding hardener and reducers in the recommended mixing ratios.
Opticlear must be agitated thoroughly at all times to ensure product consistency and consistent gloss. Apply at 3-5 mils wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper. Contact with metal surfaces should be avoided.
Opticlear must not be used and dried at temperatures below 18°C or relative air humidity above 65% as the hardening may otherwise become incomplete. During hardening, the lacquer must not be exposed to ammonia vapours. Ammonia cleaners should not be used for cleaning the finished surface.
Maximum film build of Opticlear should not exceed 4 mils dry. Maximum film build of total coating system must not exceed 4 mils dry.
431-90XX can be used as a self-seal or with following sealers: 390-001, 390-0060, 431-1219, 401-004 (not catalyzed),401-028 (not catalyzed), 546-5192 and 546-8003.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |