ES Lacquer Pre-Cat Clear Topcoat High Gloss 5 gal. (pail)
E.S. Lacquer is a ready to use, Pre-Catalyzed lacquer. E.S. Lacquer can be used as a self-seal or used with Chemseal. E.S. Lacquer has good moisture, household wear, and household chemical resistance. This coating may be catalyzed to further enhance its durability.
Agitate material before use. Always mix E.S. Lacquer while adding hardener and reducers in the recommended mixing ratios.
E.S. Lacquer must be agitated thoroughly at all times to ensure product consistency and consistent gloss. Apply at 3-5 mils wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper. Contact with metal surfaces should be avoided.
E.S. Lacquer must not be used and dried at temperatures below 18°C or relative air humidity above 65% as the hardening may otherwise become incomplete. During hardening, the lacquer must not be exposed to ammonia vapours. Ammonia cleaners should not be used for cleaning the finished surface.
Maximum film build of E.S. Lacquer should not exceed 4 mils dry. Maximum film build of total coating system must not exceed 4 mils dry.
431-98XX can be use as a self-seal or with following sealers: 390-001, 390-0060, 401-028 (not catalyzed), 431-1219, 546-5192 and 546-8003.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |