Optiprime White Pre-Cat Pigmented Primer 1 gal. (can)
Optiprime is a one-component, high solids, Pre-Catalyzed Reactive Amino Coating (RAC) used as a primer.
Optiprime is recommended for use as a primer for Optiset 131-82XX or E.S. Lacquer White 131-51XX. It has good filling properties and hiding characteristics.
This coating may be catalyzed to further enhance its durability. Contact your coating supplier for a recommendation.
Agitate material before use. Always mix Optiprime while adding hardener and reducers in the recommended mixing ratios. Optiprime must be agitated thoroughly at all times to ensure product consistency.
Apply at 3-5 mils wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper. The second and subsequent coats must be applied the same day as the previous coat is sanded.
Maximum film build of Optiprime should not exceed 2-3 mils dry. Maximum film build of total coating system must not exceed 4 mils dry. Contact with metal surfaces should be avoided.
Optiprime must not be polluted with oil, varnish or the like and must not be sanded with steel wool between the coats. Optiprime must not be used and dried at temperatures below 18°C or relative humidity above 65%. During hardening the enamel must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.
Topcoats to use over 545-8016: 131-50XX, 131-51XX, 131-82XX, 117-30XX, 117-32XX and 484-6XX
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |