Dancryl Acrylic Post-Cat Clear TC Low Gloss 5 gal. (pail)
Dancryl is a two component, acrylic lacquer designed for all types of wood for interior use. It provides a smooth, hard wearing surface that is resistant to alcohol, water, grease and usual household chemicals. Dancryl is especially suited for topcoating light coloured basecoats due to its good light stability and water white appearance.
Agitate material before use. Always mix Dancryl while adding hardener and reducers in the recommended mixing ratios. Dancryl must be agitated thoroughly at all times to ensure product consistency and consistent gloss.
Apply at 3-5 mils wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper.
Contact with metal surfaces should be avoided.
Maximum film build of Dancryl should not exceed 4 mils dry. Maximum film build of total coating system must not exceed 4 mils dry.
To obtain a complete cure, the system should be applied at an ambient temperature above 18ºC and a relative humidity below 65%. When drying, this product is not to be exposed to ammonia vapors. Finished surfaces must not be cleaned with ammonia containing products.
This product could be used as a self seal or over catalyzed vinyl sealer 401-004.
| Net Weight (kg) | 1 |
|---|---|
| UPC EAN Car | N/A |
| UPC EAN PC | N/A |
| Gross Weight Carton (kg) | 1 |
| Units Per Carton | 1 |
| Volume (L) | N/A |
| Brand | Chemcraft |
| Is Made to Order | No |