Promatch® Waterborne Wipe Stain Base 5 gal. (pail)

Please refer to your technical sales representative for tinting recommendations. Overshooting dyes and tints can cause adhesion failure. It is to the user responsibility to validate performance.

Apply a generous layer of the wipe stain, wait 30 seconds to 1 minute to start wiping off the stain using a clean rag. It is important to process quickly. Once the work done, a 4 hours waiting period at room temperature should be respected before the application of the water-based sealer.

To obtain expected results, Promatch® Waterborne W/S Base should be applied at a temperature above 18°C and relative humidity below 65%.

See SDS - Keep from freezing. Contact with metallic surfaces must be avoided. It is important to recoat the stain within 8 hours of its application.