Promatch® Dry Glaze 1 gal. (can)

Apply Dry Glaze at approximately 3-4 mils wet over sealer coat. Allow to flash off and remove excess material with a solvent‑wetted rag or "Scotch‑Brite" pad. To ensure good adhesion of the finished system, as much filler as possible should be removed from the exposed areas.

825-3410 and 825-3411 are designed to be tinted with Dry Glaze Tints from the 825-34XX line, the use of liquid tinters will complicate the removal process and is not recommended.