Plastiprimer Hardwood White Post-Cat Pigmented Primer, 1 gal. (can) – 522-1420-D1CG

Mix Plastiprimer thoroughly, then catalyze and reduce material as recommended. Plastiprimer must be well mixed while adding catalyst and reducers and must be agitated at all times to ensure product consistency. Contact with metal surfaces should be avoided once the Plastiprimer has been catalyzed. To ensure proper uniformity, the material should be agitated at all times. Recommended film build of Plastiprimer is not to exceed 4 mils dry. Total recommended film build of Plastiprimer and topcoat is not to exceed 6 mils dry..Plastiprimer must not be polluted with oil, varnish or the like and must not be sanded with steel wool between the coats. Plastiprimer must not be used and dried at temperatures below 64°F or relative humidity above 65%. During the curing process, the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finish surfaces. This may accelerate discoloration.