Variset Pre-Cat Pigmented TC Matte, 5 gal. (pail) – 131-7010-D4.5PRS

Agitate material before use. Always mix Variset while adding hardener and reducers in the recommended mixing ratios. Variset must be agitated thoroughly at all times to ensure product consistency and consistent gloss.Apply at 3-5 mils wet on sanded or primed substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper. Maximum film build of Variset should not exceed 4 mils dry. Maximum film build of total coating system must not exceed 4 mils dry. The second and subsequent coats must be applied the same day as the previous coat is sanded.Contact with metal surfaces should be avoided.Variset must not be polluted with oil, varnish or the like and must not be sanded with steel wool between the coats. Variset must not be used and dried at temperatures below 64°F or relative humidity above 65%. During hardening, the enamel must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.