VARISET SELECT Clear Tint Base Topcoat Satin, 1 gal. (can) – 131-5335-D.91CG

Catalyze and reduce the material as recommended. VARISET SELECT Clear Tint Base Topcoat is applied in one to three coats on all kinds of wood meant for indoor use. Thorough sanding between the coats is a must for good adhesion. The second and subsequent coats must be applied the same day as the previous coat is sanded.Contact with metal surfaces should be avoided. To ensure proper sheen, the catalyzed material should be agitated at all times.This product can be used with Varicure Select Sealer or as self seal. Consult with your coatings supplier for specific recommendations.VARISET SELECT Clear Tint Base Topcoat demonstrates good resistance to moisture, household and office liquids. When this product is used as its own sealer, its special formulation ensures excellent filling and easy sanding properties with superior holdout for subsequent coating. VARISET SELECT Clear Tint Base Topcoat must be thoroughly stirred, while adding catalyst and reducer in the recommended ratio. Total recommended film build of the Variset Select system should not exceed 5 mils dry.VARISET SELECT Clear Tint Base Topcoat must not be polluted with oil and must not be sanded with steel wool between coats.VARISET SELECT Clear Tint Base Topcoat must not be used and dried at temperatures below 64°F or relative humidity above 65%. During the curing process, the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.