Varicure® Select Clear Vinyl Sealer, 1 gal. (can) – 431-5202-D1CG

Agitate material before use. Always mix VARICURE SELECT Vinyl Sealer while adding reducers in the recommended mixing ratios. VARICURE SELECT Vinyl Sealer must be agitated thoroughly at all times to ensure product consistency. Apply one or two coats at 3 – 5 mils wet. The second coat must be applied the same day as the previous coat is sanded. VARICURE SELECT Vinyl Sealer must not be polluted with oil, varnish or the like and must not be sanded with steel wool between coats and before topcoating. VARICURE SELECT Vinyl Sealer must not be used and dried at temperatures below 18°C or relative humidity above 65%. During hardening the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration. The maximum film build of VARICURE SELECT Vinyl Sealer should not exceed 2 mils dry. Maximum film build of total coating system must not exceed 4 mils dry.