Chemvinyl Clear Vinyl Sealer, 1 gal. (can) – 546-8002-D1CG

Apply at 3 5 wet mils on sanded substrate. Maximum film build of Chemvinyl is not to exceed 2 mil dry. Allow 45 minutes to one hour to dry at a minimum of 68°F (20°C) prior to topcoating.Sand with 280/320 grit paper before topcoating and ensure topcoat is applied the same day the sanding is done.Always mix Chemvinyl while adding hardener and reducers in the recommended mixing ratios. Chemvinyl must be thoroughly agitated at all times to ensure product consistency. .Chemvinyl is used for sealing wooden furniture and other wood surfaces for interior use only. It can be used on all wood types and after drying and sanding, may be overcoated with acid curing systems such as Danspeed (432-XXXX, 424-XXXX), Plastofix (421-XXXX). Chemvinyl may also be overcoated with pre-catalyzed materials such as Opticlear 431-8XXX or Chemcab 431-6XXX.