Promatch ProGlaze Neutral Dry Glaze, 1 gal. (can) – 825-3678-D1CG

Prior to use, agitate thoroughly and tint as required with 844 line tints to a maximum of 7% by volume. Apply the Promatch Dry Glaze Neutral II over a sealer coat. Sand sealer with 280/320 grit paper before use. The Promatch Dry Glaze Neutral IIneeds to be applied and topcoated within 8 hours of sanding the sealer.Apply by spray and allow the Promatch Dry Glaze Neutral II to dry before removing excess material with a solvent-wetted rag or Scotch-Brite pad. To ensure good adhesion of the finished system, remove as much of the Promatch Dry Glaze Neutral as possible from the exposed areas before topcoating.Promatch ProGlaze Neutral Dry Glaze must be thoroughly agitated to ensure product consistency.