E-Var Post-Cat Clear TC Satin, 1 gal. (can) – 421-8035-D1CG

Catalyze and reduce the material as recommended. E-Var is applied in one to three coats on all kinds of wood meant for indoor use. On open pored woods, the best self-sealing is obtained by adding a minimum of 25% Reducer 803-1325 to the E-Var after catalyzing. 30%. Appropriate sealers are Catalyzed Vinyl Sealer 546-7023 with 3% Catalyst 873-0870, or Chemvinyl 546-8002 or Danseal 432-1220. Consult with your coatings supplier for specific recommendations.E-Var demonstrates excellent resistance to marring, dry heat, moisture, household and office liquids, etc.E-Var must not be polluted with oil, varnish or the like and must not be sanded with steel wool between the coats. E-Var must not be used and dried at temperatures below 64°F or relative humidity above 65%. During the curing process, the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.