Chemlife 24 Conversion Varnish Sealer, 1 gal. (can) – 421-6300-D1CG

Catalyze and reduce the material as recommended. Chemlife 24 is applied in one to three coats on all kinds of wood meant for indoor use. Thorough sanding between the coats is a must for good adhesion. The second and subsequent coats must be applied the same day as the previous coat is sanded.Contact with metal surfaces should be avoided once the Chemlife 24 has been catalyzed.This product can be used as a sealer under Chemlife 24 Topcoat 421-63XX. Consult with your coatings supplier for specific recommendations.Chemlife 24 demonstrates excellent resistance to marring, dry heat, moisture, household and office liquids, etc.Total recommended film build of the Chemlife 24 system should not exceed 4 mils dry.Chemlife 24 must not be polluted with oil and must not be sanded with steel wool between coats.Chemlife 24 must not be used and dried at temperatures below 64°F or relative humidity above 65%. During the curing process, the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.