Chemlack Express 275 NC Clear TC Low Gloss , 1 gal. (can) – 441-2220-D1CG

Agitate material before use. Chemlack Express 275 must be agitated thoroughly at all times to ensure product consistency and consistent gloss.Apply at 3-5 mils wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper.Maximum film build of Chemlack Express 275 should not exceed 3 mils dry. Maximum film build of total coating system must not exceed 3 mils dry.Chemseal Express 275 546-1222 and Chemseal 275 546-1900 are recommended. However, if desired this product may be used as a self-seal product.Chemlack Express 275 should not be used and dried at temperatures below 64°F or relative humidity above 65%.