E-Var 275 Post-Cat Clear TC High Gloss 1 gal. (can) – 421-8490-D1CG
SKU
5938940
Product Code
830-90F20-1435/CG
E-Var 275 is a two-component post-catalyzed Reactive Amino Coating (RAC). This product has been formulated to meet 275 g/l VOC regulations. E-Var 275 is a fast drying, good building product that shows excellent resistance to both chemicals and to physical wear. The coating has excellent leveling and a smooth even appearance, even on open-grain woods. E-Var 275 is supplied at a ready to spray viscosity. This coating will dry quickly and sand easily and can be used a self seal finish.Special Recognition: Architectural Woodwork Institute Conversion Varnish System (8th Ed).
Agitate material before use. E-Var 275 must be agitated thoroughly at all times to ensure product consistency and consistent gloss. Always mix E-Var 275 while adding hardener and reducers in the recommended mixing ratios.Apply at 3-5 mils wet on sanded substrate. Further coats may be applied after complete drying followed by sanding with 280/320 grit stearated paper. The second and subsequent coats must be applied the same day as the previous coat is sanded.Maximum film build of E-Var 275 should not exceed 4 mils dry. Maximum film build of total coating system must not exceed 4 mils dry. Please refer to the OSHA web site at for further information.E-Var 275 must not be polluted with oil, varnish or the like and must not be sanded with steel wool between the coats. E-Var 275 must not be used and dried at temperatures below 64°F or relative humidity above 65%. During hardening the coating must not be exposed to ammonia vapors. Ammonia cleaners should not be used for cleaning the finished surface. This may accelerate discoloration.
| Product Code | 830-90F20-1435/CG |
|---|---|
| Net Weight (kg) | 3.87 |
| UPC EAN Car | N/A |
| UPC EAN PC | 840236708598 |
| Gross Weight Carton (kg) | 4.233 |
| Units Per Carton | 1 |
| Volume (L) | 3.79 |
| Brand | Chemcraft |
| Is Made to Order | No |